One of the main draws of the Glowforge Pro laser printer is the ability to use the Passthrough slot to make extra large prints. My first attempt at using this feature was a disaster and resulted in wasted materials and 2 full days of trawling the internet looking for the information I needed to get it right.
As a result of that, I thought it would be a good idea to make a video incorporating all the information I found into one handy video, so you can start making your own large prints with minimal hassle!
If you are interested in getting a glowforge for your own business or home use, you can save up to $500 or equivalent with my referral code!
I hope you enjoy the video and I will see you in the next one.
Ordering a bespoke dog collar or belt? Please read the measuring guide to ensure you order the correct size.
When measuring for your new dog collar, the best option is to measure the internal length of a current collar adjusted to how you like it fitted. To do this, remove the collar from your dog and do it up at the desired fitting, then with a flexible tape measure measure around the inside of the collar. This length will be where the middle hole will fit on your new collar.You can also measure around your dogs neck. Place the tape measure around your dogs neck where the collar will sit and to a tightness that you like.
We will use the measurements provided as the internal measurement and add 2 larger and 2 smaller holes for adjustment.
The best way is to measure your current belt from the inside of the buckle to the hole that is used most. You can also use a tape measure and measure around your waist where your belt will sit.
We will add 3 larger and 3 smaller holes for adjustment.